1. Three checks buyers keep confusing
"Auditing a supplier" is used loosely: these three exercises answer different questions and happen at different times:
- Capability audit (before ordering) — is this a real factory or trading company, and can it actually make your product at your volume?
- Process / QC audit (before or during the first order) — how does the factory control quality on its own lines, and who can stop a bad batch?
- Product inspection (before shipment) — is this lot, in these cartons, what you approved?
A supplier can pass the first two and still fail the third — that is what happens when a normally reliable factory rushes a deadline.
2. Start with the legal entity, not the showroom
Before a video tour, ask for the business licence and check three things: the registered name matches the name on your contract and bank details, the registered scope covers the product you are buying, and the entity has real trading history. If the supplier presents itself as the manufacturer, the licence should list manufacturing, not only trading.
Then ask which processes are in-house and which are outsourced. For grooming dryers and blowers, moulding, motor winding and assembly may sit in three different buildings — outsourced steps are fine, not knowing about them is not.
3. What a factory audit should actually look at
A walkthrough that only visits the sample room tells you nothing. Ask for a full pass through production, and look for five things:
- Line flow — raw material, cutting or moulding, assembly, packing. Reverse flow usually means several orders run side by side and batches can be mixed.
- The QC station — a dedicated area with defined checks, or inspection done by the operator at the machine with no record?
- Test equipment — calipers, cycle rigs, insulation testers for electrical lines, a carton drop station. What you can see can be written into your order.
- In-house versus outsourced steps — get the list in writing. Warehouse discipline matters too: goods separated by order and marked, or your carton scheme dies on the floor.
- Capacity against your lead time — units per line per day and current order book. A factory running at 95% capacity will be late.
For category-specific questions, our pet stroller supplier checklist shows how this narrows down for a single product line.
4. The document pack to request
Documents do two jobs: they prove capability, and they become the annex to your purchase order. Ask before the deposit, not after.
| Document | What it proves | When to ask |
|---|---|---|
| Business licence (with registered scope) | Legal entity, manufacturing rights, trading history | First contact |
| Export licence / customs registration | The factory can legally export and issue the documents your broker needs | First contact |
| Test reports for the materials used | Fabric, plastic, foam and coating compliance — see the compliance map | Quotation stage |
| Internal QC procedure | Who checks what, at which stage, and who can hold a batch | Before first order |
| Signed approved sample | The physical reference for mass production | Before production starts |
5. AQL inspections: how the numbers work
Inspectors do not open every carton. They use acceptance sampling under ISO 2859-1 (and its US counterpart ANSI/ASQ Z1.4): you choose an inspection level, the lot size gives you a sample size, and the AQL you agreed sets how many defects are tolerated before the lot is rejected. General Inspection Level II is the default for consumer goods.
Defects are classified three ways, and you should agree the list in writing — not the factory, and not the inspector's own template:
- Critical — a safety or legal failure: a missing warning label, exposed wiring, a sharp edge, a part that can be swallowed. Normally zero tolerance, so one finding fails the lot.
- Major — the product will not function, fit or sell as intended: a broken zipper, a wobbling wheel, a seam that opens. Commonly AQL 1.5–2.5.
- Minor — cosmetic only: a stray thread, a light mark, a colour shift. Commonly AQL 2.5–4.0.
| Lot size | Level II sample size |
|---|---|
| 151–280 units | 32 units |
| 501–1,200 units | 80 units |
| 1,201–3,200 units | 125 units |
| 3,201–10,000 units | 200 units |
| 10,001–35,000 units | 315 units |
Count units, not defects, and insist that samples are drawn randomly across cartons, pallets and production dates.
6. Brief the inspector, don't just hire one
A generic checklist produces a generic report. Send your own spec sheet before the visit, covering:
- Quantity and carton count from the purchase order, plus the model and colour breakdown.
- Product and carton dimensions and gross weight against your spec — carton weights also feed your freight quote.
- Function tests that matter for the item: zipper cycles, buckle load, power-on and heat checks on electrical lines, frame load on strollers.
- Labelling and packaging: barcode scan, care and warning labels, country-of-origin marks, retail box integrity, inner dividers, master carton markings.
- One on-site test, such as a carton drop sequence, recorded on video or in photographs.
Ask for photos of every defect and the sample-draw location — a report with a verdict but no evidence is not usable in a dispute.
7. Tie your payment schedule to the report
The inspection only has teeth if money is still on the table. A common structure: deposit on order, a second instalment when the goods are ready for inspection, and the balance released on a passed report before the forwarder collects. A supplier who wants full payment upfront leaves you no lever.
It is also why we suggest starting with a modest order: a small trial run plus a paid inspection costs far less than a wrong container.
8. Red flags worth walking away from
- No business licence, or a licence that does not match the bank account name. Transfers to a third party are the most common loss pattern.
- Samples that cannot be matched in writing. If the supplier will not sign a spec sheet with numbers, production has no standard.
- Refusal to allow inspection. Every serious exporter expects it. Reluctance is an answer in itself.
- Prices far below the market for an identical spec. Something has been removed — usually material grade, fill weight or a test.
- Pressure to skip the sample stage. "Our existing model is fine, just order" removes your last cheap chance to find problems.
Bottom line
Vet the entity, see the process, define the defects and inspect the lot against a sealed approved sample. None of that needs a big team — it needs decisions made before the deposit, in writing. A passed inspection report is the cheapest insurance in the whole purchase.