Pet Product Packaging & Private Label: What to Specify Before Production

Packaging is the cheapest branding you will ever buy and the most common cause of expensive reprints. A well-specified carton costs a few cents per unit and does the work of a salesperson on a crowded shelf. A poorly specified one arrives with the wrong barcode, a missing compliance mark, or artwork that was approved from a screen render and never checked on card stock. Here is the full specification sheet.

1. Three layers, three budgets

Buyers often talk about "the packaging" as one thing. It is three, and they are approved separately:

  • Primary — what the customer touches: the retail box, poly bag with header card, or hang tag attached to the product.
  • Secondary — the inner unit or bundle that protects and organises: an inner box, a sleeve, or a printed poly bag.
  • Tertiary — the master carton that travels. It is never seen by a customer, which is exactly why buyers under-specify it and then pay for damaged goods.

Our OEM / ODM service covers all three layers and confirms them on a physical sample before mass production.

2. Choosing the retail format

FormatBest forWatch out for
Colour box (folding carton) Grooming tools, toys, anything with a story to tell on the shelf Highest unit cost; needs a die-line and often a printed insert
Poly bag + header card Soft goods, toys, accessories; e-commerce first Looks cheap in physical retail; needs a suffocation-warning note in several markets
Hang tag / belly band Products where the item itself is the selling point (leashes, clothing) Limited space for compliance text and barcodes
Blister or clamshell Small hard goods that need to be seen Plastic-heavy; increasingly penalised by European retailers
Mailer box (e-commerce) Direct-to-consumer, subscription boxes Overkill for wholesale; check it survives a courier network

3. Artwork: put these on the pack

Separate the legal minimum from the selling content, and specify both:

Legal and logistical (never optional)

  • Product name and net quantity (weight, count or dimensions, in the unit your market requires — metric, imperial, or both).
  • Your brand, importer or responsible person address as required by the destination market.
  • Barcode, and for electricals the compliance mark, voltage and wattage.
  • Material and care instructions where relevant (textiles in particular).
  • Batch or production code, so you can trace a recall back to a production run.

Persuasive (where the margin lives)

  • One clear benefit line, not five. The buyer has three seconds.
  • Two or three feature icons — machine washable, waterproof, one-hand fold, quiet operation.
  • Real product photography. Lifestyle imagery sells, but a clean shot of the actual product builds trust.
  • Size or breed guidance table on anything sized — carriers, clothing, beds, strollers.
Proof the artwork on the real substrate at the real size. Colours shift between a screen and a printed carton, and small compliance type that reads comfortably on a monitor can become illegible on a 60 mm hang tag.

4. Barcodes: get this right the first time

  • Retail: UPC-A (North America) or EAN-13 (Europe, most of the world) — licensed through GS1 and issued in your company's name, not the factory's.
  • Marketplaces: Amazon and similar channels require a GTIN matching the barcode on the pack; for FBA you additionally need an FNSKU label, which the factory can apply at the carton or unit level.
  • Carton: ITF-14 or a plain carton code. Specify it if your channel or 3PL scans cartons.
  • Quiet zone: barcodes need clear space around them. Artwork that ignores this is the most common cause of scan failures at the retail till.

5. Master carton specification

Write this into the order, not into an email thread. The tier-3 carton determines your damage rate and your freight cost per unit simultaneously.

ItemWhat to state
Board grade5-ply for anything above roughly 15 kg gross; 3-ply only for light soft goods
Internal dimensionsIn millimetres, with the packing configuration (how many units, how nested)
Gross weightPer carton and per unit, with carton count per pallet if palletised
PrintingShipping marks, barcode, handling icons (this way up, keep dry), country of origin
ProtectionPoly bag per unit, corner protection or divider for hard goods, desiccant where humidity is a factor
TestAsk for a drop test result, or run one against the first production carton

6. Compliance marks by market

  • EU: CE for electricals and toys, RoHS, REACH where applicable, WEEE registration for electrical goods, plus packaging recycling labelling which varies by member state.
  • UK: UKCA in place of CE for most goods, plus a UK responsible person for many product categories.
  • US: UL or ETL listing for electricals, FCC for devices with radio or certain electronics, California Prop 65 warnings where relevant.
  • General: country of origin marking, and edible or chewable items need materially different treatment entirely.

7. Sustainability is now a purchasing criterion

Retailers in Germany, the Netherlands and Scandinavia increasingly ask packaging questions in supplier audits. Practical answers that cost little:

  • FSC-certified board for cartons, with the FSC logo printed on the pack.
  • Recycled content percentage stated on the artwork — a real selling point in Europe.
  • Paper-based or recyclable inner protection instead of EPS foam where the product allows.
  • Right-sizing the carton: void fill is wasted money and a bad sustainability story.

8. The approval workflow that avoids reprints

  1. Die-line and artwork spec — the supplier sends the template at the correct dimensions.
  2. Digital proof — you approve layout, text and colours on screen.
  3. Physical proof — a printed sample on the real stock. This is the step people skip, and the one that prevents reprints.
  4. Pre-production sample — the finished product in the finished packaging, sealed and photographed.
  5. Mass production — against the approved sample, not against the artwork file.

If you are still deciding how far to take branding, our OEM vs ODM guide explains what changes when the factory redesigns the product rather than just the box — and our product range shows the packaging formats already in production.

Bottom line

Specify the carton as carefully as the product, put the artwork through a physical proof, license your own barcodes, and state the compliance marks your markets require. Packaging is the one part of the order where a few hours of specification work saves thousands of units of rework.

Where this applies in our own range

Most of what is described here can be specified on any line we supply. See the pet toy range for the category where packaging does the heaviest selling — hanging cards and impulse presentation decide the purchase long before the toy does.

Ready to put your brand on the pack?
Send your artwork brief — packaging plan and quotation within 1 hour.

Chat on WhatsApp
Send Your Inquiry Here on WhatsApp Reply within 1 hour